1- baddass 1000 watt digital ballast

1- uno 8” relector  36x31x10

1- baddass 1000 watt hps bulb

case price  12 bulbs at 69.95 per bulb

90,000 LUMEN OUTPUT, A VICIOUS FIRESTORM OF RED LIGHT FOR AN EXPLOSIVE FLOWERING STAGE, AND THE QUICKEST STRIKE TIME EVER RECORDED… NOW IN A 600 WATT HPS BULB.

At a massive 90,000 lumens, your Red Diamond® 600 Watt HPS bulb gives you complete bragging rights over any other 600 Watt bulb available… because it has the highest initial lumen reading of any bulb in its class.

• You’ll enjoy a powerfully enhanced flower spectrum that will give you over 99% color consistency thanks to a unique gas combination that blasts out a firestorm of red light!

• Your 600 Watt Red Diamond® bulb is ready to work – immediately. With a strike time of less than 4 minutes, the Red Diamond® 600 Watt bulb reaches full lumen output faster than any other bulb in its class. For best results pair with a BaddAss Low Frequency Digital Ballast™.

• Your Red Diamond® 600 Watt HPS bulb is protected in an exclusive “cocoon” of packaging that you’ll only get with BaddAss Bulbs™. Plus, each one of your Red Diamond® bulbs comes in an Oil Guard® protective removable sleeve which will prevent the oils from your hands from ever coming in contact with the surface of the bulb. This is important because oils from hands and fingers can cause hot spots that severely damage a bulbs surface, even worse, in some cases leading to bulb rupturing or exploding.

• Your Red Diamond® 600 Watt HPS bulb is painstakingly built and held to strict AQL standards. If even one slight defect is found on even one bulb, we go all the way back to the beginning of QC to our visual, functional test and burn-in stages and go through the whole testing and qualification/approval process over again.

Advanced nutrients 600 watt baddass hps bulbsEdit

90,000 LUMEN OUTPUT, A VICIOUS FIRESTORM OF RED LIGHT FOR AN EXPLOSIVE FLOWERING STAGE, AND THE QUICKEST STRIKE TIME EVER RECORDED… NOW IN A 600 WATT HPS BULB.

At a massive 90,000 lumens, your Red Diamond® 600 Watt mh bulb gives you complete bragging rights over any other 600 Watt bulb available… because it has the highest initial lumen reading of any bulb in its class.

• You’ll enjoy a powerfully enhanced flower spectrum that will give you over 99% color consistency thanks to a unique gas combination that blasts out a firestorm of red light!

• Your 600 Watt Red Diamond® bulb is ready to work – immediately. With a strike time of less than 4 minutes, the Red Diamond® 600 Watt bulb reaches full lumen output faster than any other bulb in its class. For best results pair with a BaddAss Low Frequency Digital Ballast™.

• Your Red Diamond® 600 Watt HPS bulb is protected in an exclusive “cocoon” of packaging that you’ll only get with BaddAss Bulbs™. Plus, each one of your Red Diamond® bulbs comes in an Oil Guard® protective removable sleeve which will prevent the oils from your hands from ever coming in contact with the surface of the bulb. This is important because oils from hands and fingers can cause hot spots that severely damage a bulbs surface, even worse, in some cases leading to bulb rupturing or exploding.

• Your Red Diamond® 600 Watt HPS bulb is painstakingly built and held to strict AQL standards. If even one slight defect is found on even one bulb, we go all the way back to the beginning of QC to our visual, functional test and burn-in stages and go through the whole testing and qualification/approval process over again

B-52 is especially formulated to give plants a super boost of energy by raising the plants metabolism. B-52 increases nutrient uptake by providing naturally occurring hormones and vitamins that plants could never get elsewhere. B-52 is ideal for hydroponic, soil, and sphagnum moss or any other growing medium. In reservoirs or as a foliar spray or as a stand alone supplemental feeding, B-52 can and should be used during your plants ENTIRE lifetime from seed or cutting to harvest

BUILT FROM THE GROUND UP WITH EXACTING AEROSPACE ENGINEERING INSPIRED STANDARDS TO MEET THE DEMANDS OF GROWERS LIKE US…

Unlike other hydroponics equipment manufacturers, Advanced Nutrients refused to simply buy existing ballasts from China… slap their logo on them… and call it a “new” product because:

That’s why every ballast produced by Advanced Nutrients is designed from the ground up to meet the strict needs of growers of high value plants like us. In fact, every ballast goes through a exhaustive seven-step process before it’s ever introduced to the marketplace.

FIRST: A research team is assigned to compare and gather intelligence on all the current ballast technology on the market. Then, perhaps more importantly, the team gathers feedback from growers all over the world about what they like about the available technology… what they don’t like… what works and what doesn’t work… and what their suggestions are.

SECOND: Taking this data, Eli Weinkle (and his team) draws upon his background in Electronic Assembly for The Defense and Aerospace Industry to design exacting engineering specs to solve all these problems and meet the needs of growers of high value plants like ours. In addition, drawing on his background in aerospace engineering Eli specifies the exact processes and workmanship standards to be followed at the production factory when constructing these heavy-duty ballasts.

THIRD: The engineering specs, workmanship guidelines, and production processes are sent to the U.S. owned manufacturing facility to produce a proof of concept model of the new ballast. Here the exact blueprints provided by the research and development teams at Advanced Nutrients are followed to construct a brand new product from the ground up.

FOURTH: The proof of concept is then sent to an independent qualification lab in Los Angeles to ensure it fulfills all the guidelines in the original engineering specs. At this point, if even the slightest detail is not accurate, the team in L.A. sends word back to the factory to fix these issues. From here, once all the qualifications are fulfilled, then it’s ready to be handed off to a second lab.

FIFTH: To further ensure the accuracy to the original specs and functionality of the new ballast it arrives at a second independent testing lab in Southern California to undergo another exhaustive round of testing and meeting qualification standards. Again, if any problems are found at this point, word is sent back to the original manufacturing factory and the process starts over again. But once it passes then it’s ready for the final inspection…

SIXTH: There is one final test the proof of concept ballast has to pass before producing a pre-production sample—it has to perform flawlessly under the watchful eye of the original creator of the engineering specs—Eli Weinkle. It’s at this point his expert eye will either find every last error or give the thumbs up for a pre-production sample of the ballast to be produced back at the factory.

SEVENTH: Once the pre-production sample is produced at the factory it goes through all six steps again to ensure it still meets all the previous guidelines and is functioning correctly. Assuming the pre-production sample passes all these tests a second time, then the final green light for the production of the ballast is issued.

Once it’s in production, the ballast goes through a full 100% quality inspection at factory. Plus, as the units are delivered, Eli and his team pick out random units and do additional lot testing themselves to make sure no problems or damages have occurred in route from the factory.

YOU MAY THINK YOU’RE GETTING ALL YOU CAN OUT OF YOUR WALL FAN SYSTEM, BUT… IF YOU AREN’T USING THIS, YOU HAVEN’T SEEN THE POWER OF A PREMIUM WALL FAN SYSTEM, OFFERING SUPERIOR CONTROL, UNPARALLELED PERFORMANCE AND ABOVE INDUSTRY STANDARDS.

If you’re looking for a new cooling fan for your grow room… one made to meet the stressful demands of growers of high-value plants like us… then here’s why you should pay close attention to the new 16″ Figure-8 Programmable Oscillating Wall Fan from Advanced Nutrients:

 
GIVES YOUR GROW ROOM SUPERIOR AIR CIRCULATION AND COVERAGE

Because your BaddAss Blades™ fan uses a unique figure-8 blow pattern and blade design, you get previously impossible CFMs of air coverage. No other Grow Room fan has been able to produce such complete and thorough performance and coverage.

 
YOU’LL HAVE TOTAL AIR CIRCULATION CONTROL

What does it mean to have complete and total control of your grow room air? So far as the circulation of your grow room air is concerned, it means having a BaddAss Blades™ fan that will carefully carry out your precise commands. Your BaddAss Blades™ fan has a fully custom programmable controller that’s been painstakingly engineered to do what you want when you want.

 
YOU GET ALL METAL GEAR CONSTRUCTION

You’ll get above industry standard of reliability because your BaddAss Blades™ fan utilizes only the highest quality metal gear construction, giving you unheard of reliability in a fan market saturated with sub-par plastic gears. It’s why we’re able to offer our bullet-proof 3-year, Two-Track Guarantee.

• Figure-8 oscillating pattern cools a larger area than standard fans!
• Quiet and smooth operation!
• Only Fan with programmable built in timer!
• Easy-to-use keypad and remote control!
• Certified for US and Canada.

 
As always, with Advanced Nutrients, you can put this equipment to an “in home trial” in your own grow room before you make your decision… Because this unit comes with a six month money-back guarantee, simply go to your local hydroponics shop today… start using the fan for the next six months… convince yourself it is the cooling fan you’re looking for… and be absolutely convinced before you make a commitment. Either you love it or you get all your money back… it’s that simple… so you should strongly consider picking one up and using it today.

 
BADDASS BLADES™ Easy To Use Controls, Programmable Timer and Figure 8 Cooling Pattern Make It Easy To Cool Any Environment!

ATTENTION GROWERS HAVE YOU HEARD ABOUT HOW THE BADDASS BLOWER® HAS SHATTERED THE INDUSTRY STANDARD?

The industry standard for inline blowers has been shattered. Until now, most inline blowers removed excess heat, replaced stale air with fresh air, helped manage humidity and all the other things inline blowers do pretty good.

But a group of engineers knew they could do better, after all they were Swedish, and well… lets just say the “Swedes” are very particular when it comes to this kind of engineering. So they developed a unique cyclonic system that removes the turbulence from the inline blowers air stream.

And it turns out, that eliminating parisitic turbulence is absolutely critical if you want to achieve ultra smooth high velocity air flow, because turbulence is exactly like putting on the air flow “brakes” when it comes to getting high volumes of air moving through your grow room ducting or air scrubbers.

And they didn’t stop there, they built the BaddAss Blower® solid, like the Rock-of-Gibraltar, by using permanently lubricated and enclosed bearings so you’ll never have to worry about rust or a loss of performance.

Even better, it has precision fitted high-grade steel construction with vise like sealing to ensure moisture never penetrates your vital circuitry and a rust proof coated housing offering you another layer of protection in humid environments guaranteeing you maintenance free performance. What’s more, you get an unprecedented 20 year warranty, the best of any inline blower in the industry.

HERE ARE A COUPLE MORE REASONS WHY THE BaddAss Blower® IS THE BEST IN ITS CLASS

• Your BaddAss Blower® gives you superior velocity and more cubic feet of air movement than any other blower in its class… 
• Your BaddAss Blower® has been precisely crafted and hand-balanced for flawless operation and lifelong reliability. The performance you get when you open the box and plug it in is the exact performance you’ll get year after year. 
• When you install your BaddAss Blower®, you’ll find that it can be conveniently positioned any way you like. Thanks to the compact design, it also fits where many inline blowers cannot. 
• Because of the simple yet brilliantly effective Swedish engineering and manufacturing

Big Bud has been specially designed for use with all hydroponics, sphagnum and soil growing mediums. Big Bud has been developed for use with any and all hydroponic, aeroponic, drip irrigation, NFT, flood and drain and continuous liquid feed growing systems.